User's Manual

Chapter 4 Web-based Configuration 35
WA3001-S Access Point User Guide
Parameter Specification Default
Quiet period if
authentication
failed
If the user name or
password failed because
of authentication, the AP
will not process the
authentication request
from the Client within
Quiet-period value.
Possible values: 1-65535
seconds.
5
Re-
authentication
period
Interval to re-authenticate
a client. Possible values:
1-65535 seconds.
180
Response
period for
EAP
Interval of AP sending
Request-challenge
request to the client under
EAP authentication (Re-
sending because the
Response-challenge was
not received). Possible
values: 1-65535 seconds.
30
Max Request
times for EAP
Maximum number of
retries to send a Request-
challenge request from AP
to client under EAP
authentication (Re-
sending because the
Response-challenge was
not received). Possible
values: 1-2.
2
• For a specific user: The configuration user interface is shown in Figure
45
Figure 45 For a Specific User Configuration
- User ID: The system automatically generates an unique ID when
creating a new user.
- Re-authentication: Enable or disable re-authentication.
Note: User ID can be searched through “Statistic Information”
and “Online User".
• Initial a specific user configuration interface is shown in Figure 46