User's Manual

26 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
Figure 29 DHCP Relay Configuration
Three IP addresses of trusted DHCP server can be set here. The AP will
obtain LAN’s IP address, Subnet mask, Gateway, and DNS server from the
DHCP server configured here.
DHCP exclude IP address can be configured in DHCP Relay mode.
None
Select “None” to disable the DHCP server
WAN Interface Configuration (WA6011)
Click “WAN Interface”, see Figure 30, “WAN Interface Status” displays the
current WAN port status.
Figure 30 WAN Interface Configuration (WA6011)
PPPoEWA6011 can obtain the WAN IP address via PPPoE dialup,
see Figure 31.