User's Manual

22 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
Figure 22 Wireless Port Configuration (without Wireless Network Card)
Click “Wireless port 1” to go to the Wireless Port Configuration section on
the top of the window as shown in Figure 23.
Figure 23 Wireless Port Configuration
Wireless Port Configuration
- Uplink detect: If the “Detect” check box is selected, after click
<Apply>, the AP will automatically disconnect from the wireless
LAN when the uplink has been lost or does not work properly.
- Mode: WA6011 complies with the 802.11b/g which is the default
working mode. Data transfer speed in 108g mode is 108Mbps. Click
<Apply>, the system will prompt to save the configuration and
reboot the AP.