User's Manual
Chapter 4 Web-based Configuration 19
WA3001-S Access Point User Guide
Figure 16 LAN Port Configuration
The LAN port configuration window displays the default IP Address and
Mask. The IP address is able to enter a new one, then click <next> to go to
the wireless port configuration, as shown in Figure 17
Figure 17 Wireless Port Configuration
The default SSID is “UT”, and the Channel is “1”. The value of SSID and
channel are changeable. User can access the AP only when the ESSID
setting in the wireless network card of user’s terminal is configured to be
same as the one in the AP. Click <next> to go to the completed configuration
window shown in Figure 18. Click <finish>, the AP will save the configuration
and restart automatically.