User's Manual

26 Chapter 4 Web-based Configuration Introduction
• DHCP Server configuration
- Configure the DHCP server when the AP needs to allocate
an IP address to its clients
- Configure the DHCP address field attributes, or keep the
default attributes
- DHCP Client configuration
- Configure the DHCP client when the AP needs to allocate
an IP address to a client through the remote DHCP server
• Authentication
- Activate the option for 802.1x authentication
- Configure global user authentication attributes among the
Server, the AP and the Client.
• RADIUS Client configuration
- Configure this option while using a Radius server to
perform authentication or accounting
• Users Management: Dynamic, Static and Online users
- Configure this option while managing the users in local
authentication mode, local + Radius or Radius + local
mode
• NAT configuration
- In Router mode, configure the NAT when the system
requires AP to manage the IP addresses for its clients
- There are two types of NAT configurations: Static NAT and
NAPT (based on port forwarding)