User's Manual

Chapter 9 CLI Command Set 199
Show Dot1x Statistics
Use this command to display the statistics of 802.1x.
Syntax: show dot1x statistics
Access level : 0
Show Flash
Use this command to list the flash code information, such as
version number, size and so on.
Syntax: show flash
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
/image <DIR> 2000-01-16 21:31:26
/image/3001A.Z 931895 2000-01-02 22:18:26
/config <DIR> 2000-01-16 21:31:26
/config/config 6034 2000-01-09 21:34:08
Show Dot1x Authentication Configuration
Use this command to display the dot1x authentication
configuration.