User's Manual

196 Chapter 9 CLI Command Set
Execute this command, and the following will be displayed:
Baud rate : 9600
Timeout : 30 minutes
Parity : no
Data bits : 8
Stop bits : 1
Flow control : disable
Show DHCP-Client
Use this command to display the DHCP client configuration.
Syntax: show dhcp-client
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
DHCP status : enable
DHCP server :
DHCP trusted server: 1.1.1.1
Show DHCP Service
Use this command to display the current DHCP service (RELAY
or SERVER) in the system.