User's Manual

Chapter 9 CLI Command Set 157
retransmit: 1-6; default value: 3
Access level: 2
RADIUS-Server Dead-Time
To improve RADIUS response time when some servers might
be unavailable, use the radius-server dead-time global
configuration command to cause the unavailable servers to be
skipped immediately. Use the no form to set the dead time to 5
minutes.
Syntax: radius-server dead-time <minutes>
no radius-server dead-time
Possible value: minutes: 1-1440 minutes (24 hours).
Default value: 5.
Access level: 2
RADIUS-Server Retransmit
Use this command to specify the number of times the RADIUS
server sets to down. Use the no form to return to the default
value.
Syntax: radius-server retransmit <retries >