User's Manual

Chapter 9 CLI Command Set 139
Syntax: dot1x supplicant-timeout <seconds>
no dot1x supplicant-timeout
Possible value: 1-65535s
Default value: 30s
Access level: 2
Explanation: Use this command to set dot1x supplicant timeout.
Dot1x TX-Period
Use this command to set the number of seconds that the device
waits for a response to an Extensible Authentication Protocol
(EAP)-request /identity frame from the client before
retransmitting the request. Use the no form of this command to
return to the default setting. The user should change the default
value of this command only to adjust for unusual circumstances
such as unreliable links or specific behavioral problems with
certain clients or authentication servers.
Syntax: dot1x tx-period <seconds>
no dot1x tx-period
Possible value: <seconds>: 1-65535 s
Default value: 30s