User's Manual

102 Chapter 8 Web-based Configuration Examples
1. After completing the hardware installation, launch the
WEB configuration interface.
- According to the above network topology, use a
network cable (straight-through or crossover) to
connect the PC and the AP’s LAN interface. Set the
PC IP address as 172.18.37.X/255.255.255.0. The
default IP address of the AP LAN interface is
172.18.37.1
- Input http://172.18.37.1 in the PC browser. Use
“admin” for both username and password to log in to
the system
2. Set the AP in Bridge mode.
- Click Guide to display the “Set AP Mode” window as
shown below. The default mode is Bridge mode.
- Click <Next> to display the “Set LAN Interface”
window as shown below: