User's Manual

Chapter 5 Setup Configuration 35
35
Figure 24 WLAN Management
• Access List
- Select “Allow” and enter MAC address in the “Mac
Address” box, thus only the wireless station of the
MAC address can access the CPE.
- Select “BAN” and enter MAC address in the “Mac
Address” box, thus the wireless station of the MAC
address can’t access the CPE.
- MAC Address: Enter a MAC address in the box and
click <Add>, the MAC address will list below. Click
<Delete> to cancel the access list settings.
Click <Apply> to initiate the configuration and it will take effect
after rebooting.
• Associated Stations
Click “Associated Stations” to display the window as shown in
Figure 25. All the wireless stations connected to the CPE are
listed on the window.