User's Manual

24 Chapter 5 Setup Configuration
24
• PPPoE
Table 4 PPPoE Description
Fields Description Default
Choose a
connection
Select “New” to set up a new
connection. All the connections are
listed in the box.
Type
Possible values: PPPoE, PPPoA,
Static, DHCP, Bridge, CLIP
Sharing
Possible values: Disable, Enable, LAN.
Disable: Each PVC of the connection
should be different.
Enable: Multiple connections share the
same PVC.
VLAN: VLAN tag is attached to the
connection.
Disable
QoS
Possible values:
UBR: Unspecified Bit Rate
CBR: Constant Bit Rate
VBR: Variable Bit Rate
UBR
Priority Bits Possible values: 1-7 1
Username/
Password
The service provider offers them for
PPPoE connection.
Keep Alive
The maximum period that the CPE
initiates connection request
10 min
Set Route
Enable “Set Route” and the gateway IP
address the CPE obtained is taken as
the CPE default gateway.
VPI/VCI
VPI/VCI is needed for each
connection. The value is compliance
with the setting of DSLAM