User's Manual

Chapter 4 Quick Start 21
21
Figure 11 WLAN
Table 3 WLAN Settings Description
Fields Description Default
Enable AP Enabled
Channel 1-14 11
SSID
The SSID is for subscribers
grouping. Only the wireless stations
that have the same SSID as the CPE
can access the device.
utstar
Domain
Possible values: FCC, IC, ETSI,
SPAIN, FRANCE, MKK, MKK1, US,
WORLD
FCC
Power Level
The transmitting power level of the
CPE wireless interface, i.e. the
percentage of maximum transmitting
power. Possible values: Full，50
％，25 ％，12 ％，6 ％
Full
802.11 Mode
CPE wireless work mode. Possible
values: Mixed, 11b only, 11g only
Mixed