User's Manual

Before Configuration

NetSprite1023 provides Web-based management of the device.

To access the CPE, users can connect a PC to any one of the

Ethernet ports. The Ethernet and WLAN interfaces use the

same IP address (192.168.1.1/255.255.255.0) by default.

Users can access the CPE as following:

1 Set the IP address on the PC connecting to the CPE. The

IP address must be in the same subnet as the LAN

interface, for example, 192.168.1.10/255.255.255.0.

2 Open the Internet Explorer (IE) on the PC and enter:

http://192.168.1.1.

3 The login window will appear as shown in Figure 5. Enter

the user name and password. The default user name and

password for administrator are both “Admin”.

NetSprite1023 also provides username of “user” and

password of “user123” for end-users.