User Manual

Chapter 2 WA3003G4 Installation 7
WARNING
Before you begin, turn the power
off for all devices. These include
your computer(s), your LAN
hub/switch (if applicable), and the
WA3003G4.
Figure 2.3 illustrates the hardware connections.
The layout of the ports on your device may vary from the layout shown. Refer to the steps that
follow for specific instructions.
Figure 2.3. Overview of Hardware Connections
Step 1. Connect the VDSL cable and optional telephone.
Connect one end of the provided phone cable to the port labeled VDSL on the rear panel of the
device. Connect the other end to your wall phone jack.