User's Manual

4-2 The Additional Functions FSU811 User Guide
4.2.2 Delete Your Number
1. Press MENU/OK , then 3 ,then 1.
z If your number has not been entered yet, only “Own Number” will be
displayed.
z If your number has already been entered, both “Own Number” and the
number you entered will be displayed.
2. Press MENU/OK to proceed.
3. Press 2 to select “Delete”, the message “Delete?” will be displayed.
4. Press MENU/OK to confirm the deletion; “Deleted” will be displayed,
indicating that the original number has been deleted.
4.3 Ring Mode
4.3.1 Select Ring Tone
z The ring type of incoming calls can be selected
z There are altogether 17 ring types available. The default ring type is “four
little swan (RING 6)”
1. Press MENU/OK→3→2, to display the “Ring Mode” menu.
2. Press
【】
1 to display the “Ring Tone” menu.
3. Press UP/DOWN to browse the ring types.
z The phone will play a sample of each selected ring tone. If the current volume
is set to “Off”, the phone will play a sample of the selected ring type at low
volume.
4. Press MENU/OK to confirm the selected ring tone. If the setting is successful,
“Finished” will be displayed; otherwise, prompt of failed will be displayed.
4.3.2 Adjust the Ring Volume
z Three (3) different ring volume levels may be selected (high, low, and off).
The default setting is “Low”.
z If the ring volume is not “Off”, the “ ”icon will be displayed in standby
mode .
1. Press MENU/OK→3→2, to display the “Ring Mode” menu.
2. Press 2 to display the volume selection menu.
3. Press UP/DOWN to select a volume setting.
4. When setting the volume, the phone will play an audible sample of the
corresponding level.
5. Press MENU/OK to confirm the selected volume. If the setting is successful,
“Finished” will be displayed; otherwise, prompt of failed will be displayed.