Install Manual
Table Of Contents
200mW RP Installation RPC/RP Manual
WLL-200mW-RP-IN-1.0 25July2000
26
! NOTE: If the local line cables cannot be wired, use vinyl tape to seal the holes
through which the line cables are supposed to come in.
4. Wrap the self-bonding tape half-lapping and elongate 1.8 to 2.0 times its
original length. Don’t over elongate, or it will show signs of cracking.
5. Wrap the protective adhesive PVC tape around the self-bonding tape.
Figure 26: Wrapping the Tape