User Manual

RPC/RP Manual RPC/RP Configuration
19June2000 WLL-RPC/RP-IN/UM-1.0
4-
51
Field Name Definition
No. Item sequence numbers, starting from 1
Value Specified value for the item. The value can be selected from the arrow
drop-down list.
Item Item name and value description
Basic Basic value
Unit Item value unit
Min The minimum value which can be specified for the item
Max The maximum value which can be specified for the item
HEX val. Switch between the hexadecimal and the decimal value
Button Name Description
Target Select the target PRC ID number to display its system parameters.
Item Only item names are displayed on the right column.
Basic Basic value, unit value, and item names are displayed on the right
column.
Range Maximum value, minimum value, unit value, and item names are
displayed on the right column.
< Scroll the window downward one line at a time.
> Scroll the window upward one line at a time.
<< Scroll the window downward one page at a time.
>> Scroll the window upward one page at a time.
Save Save the value setting.
Top Go to Service Data 1 window.
Table 4-14: Edit of Service Data 3 Window Field Definition
There are three different windows for this function: Item, Basic, and Range. Use
the View Block to switch to different windows. Edit the data as necessary and
click Save. A confirmation box appears, prompting: “Current file will be replaced
by this contents. OK?” Click Yes to confirm or No to stop the transaction.
The operation data in the Item block contain many system parameters. They are
for view only. Users should use the Arrow drop-down list in the Value field to
make any necessary change to the setting. Each of the system parameters in the
Item block is described as follows:
Call discrimination code
The length of the Call Discrimination Code data field is 48 bits, but the
last 6 bits are not used. So the remaining 42 bits are used for call
discrimination code. The value determines the RP-ID (CS-ID). And it
needs to be unique among all RPCs. The following diagram describes
how the 42 bits are split into several divisions.
Call Discrimination Code
-----------------------------------------------------42 bits------------------------------------------------------
Public System Additional ID
---------------------------------------33 bits-------------------------------------- Operation ID Code
----------9 bits---------
Paging Area Number
-------------------------22 bits-------------------
-----
Additional ID
--------11 bits--------