User Manual

RPC/RP Configuration RPC/RP Manual

WLL-RPC/RP-IN/UM-1.0 19June2000

Figure 4-70: RPC/RP Traffic Report Window

F NOTE: Sometimes nothing happens after the Refresh button is clicked. The

reason is that the RPC board may have been reset by RTs and there is no

synchronization between the RPC device manager and the RPC board. In that

case go to the RPC System View window, click open the Configure main menu,

and select Set Time. The Set Time window opens. Click OK to synchronize the

RPC device manager with the RPC board. After the traffic data pile up in the

board the RPC device manager can retrieve the traffic report. This rule also

applies to the RP Status Report operation, as described in Section 4.6.3.

3. Figure 4-70 presents the traffic report for each of the 32 associated RPs. The

report is organized in such a way that each block displays all the 29 traffic

statistics elements for an RP for the period of one hour. Refer to the following

figure for the description of each of the 29 statistics elements.