User Manual

RPC/RP Manual RPC/RP Configuration

19June2000 WLL-RPC/RP-IN/UM-1.0

button or click Air Channel on the Unit View window of the RPC window to

open the Channel Status View window. After resetting, unblock the unit.

1. On the Main View window, click the target RPC-DM node and connect to the

RPC. This opens the RPC window.

2. Select the Reset option from the Maintenance pull-down menu or click the

Reset button. The Reset window appears, as shown in the figure below.

Figure 4-65: Reset RPC Window

3. Select either an RP, an E1 interface, an RP interface, or the entire RPC. Click

OK. The system resets the unit, returns it to operation, and sends a message to

the Self Messages window. Suppose that the RP#1 of the RPC#2 were reset,

the window would be like the figure below.

Figure 4-66: Self Messages Window for Reset

4. If an RPC needs to be reset, select the RPC and click OK. This brings up the

EM Reset (RPC) window as shown in the figure below.