User Manual

RPC/RP Configuration RPC/RP Manual
WLL-RPC/RP-IN/UM-1.0 19June2000
4-
62
Field Name Definition
No. Item sequence numbers, starting from 1
Value
Specified value for the item. The valid values are displayed in the Item
block and can be selected from the arrow drop-down list.
Item Item name and value description
Basic Basic value
Unit Item value unit
Min The minimum value which can be specified for the item
Max The maximum value which can be specified for the item
HEX addr. Switch between hexadecimal and decimal value
Button Name Description
Item Only item names are displayed on the right column.
Basic Basic value, unit value, and item names are displayed on the right
column.
Range Maximum value, minimum value, unit value, and item names are
displayed on the right column.
< Scroll the window downward one line at a time.
> Scroll the window upward one line at a time.
<< Scroll the window downward one page at a time.
>> Scroll the window upward one page at a time.
OK Implement the command.
Table 4-15: Data Value Change Window Field Description
2. There are three different windows for this function: Item, Basic, and Range.
Use the View block to switch between different windows. Refer to Section
4.3.8.3 for the detailed description for the Value field and the Item block.
3. Make necessary changes and click OK to close the window.
4.4 Manage RPC Alarms
This section discusses several aspects concerning the RPC warning and alarm
history. Through the RPC device manager, we can update and clear the alarm, or
save the alarm history to files for further analysis.
The warning messages are also displayed in the Status View windows for RPCs,
RPs, and interfaces, as described in Section 4.2.4.
4.4.1 Warning Status
The RPC device manager can display currently occurring warnings about the
RPC, RP, E1 interface, and RP interface.
1. On the Main View window, click the RPC R2.4 node. Get connected to the
target RPC.