User Manual

RPC/RP Manual RPC/RP Configuration
19June2000 WLL-RPC/RP-IN/UM-1.0
4-
61
Figure 4-61: E1-IF Board Installation
3. Check or uncheck the boxes in front of the target E1 interfaces to be installed
or uninstalled, and click OK.
4.3.11 Change Data (Data Value)
Use this function to change the operation data value.
F NOTE: This feature is not recommended. Use with care.
1. From the Configuration main menu, click Service Data, then Change Data,
and then Data Value. The Data Value Change window opens, as illustrated
in the figure below.
Figure 4-62: Data Value Change Window