User Manual

RPC/RP Manual RPC/RP Configuration

19June2000 WLL-RPC/RP-IN/UM-1.0

Figure 4-58: RP Installation (Group Composition 1) Window

2. This window is used to configure RP connection. For each installed RP, enter

a √ in the Inst. row. For each installed RP, specify the power source by

clicking on either the Phantom button or the Local button. Phantom means

the power is supplied by the RPC. For WLL, the power source is Phantom.

3. To get to the RP Installation (Group Composition 2) window, click Next or

Switch 2. The RP Installation (Group Composition 2) window is shown in

the figure below.

Figure 4-59: RP Installation (Group Composition 2) Window