User Manual

RPC/RP Configuration RPC/RP Manual

WLL-RPC/RP-IN/UM-1.0 19June2000

Bit 1-4 (xxxx) are the value of loudness, as listed below:

Real level Bit 4 3 2 1

0 dB à 0 0 0 0

2 dB à 0 0 0 1

4 dB à 0 0 1 0

6 dB à 0 0 1 1

...............

Bit 5 is the value of sign.

Sign Bit 5

à 1

à 0

...................

For instance, if the output loudness of RPC needs to be set to + 8 dB, the

setting value is as follows:

0001 0100 (Binary)

This value is determined in accordance with the system level plan.

DTMF sound sending interval value

In the case of PS origination, dialing information is transferred as a

message from the PS to the RPC. The RPC generates the DTMF signal

tone according to the received message. This item is used for the setting

of DTMF minimum pause of the DTMF signal. The value (unit: msec) is

directly set in the value field.

For instance, if the sending interval time needs to be set to 80 msec, the

setting value is "50" (HEX).

DTMF sound sending time value

In the case of PS origination, dialing information is transferred as a

message from the PS to the RPC. The RPC generates the DTMF signal

tone according to the received message. This item is used for the setting

of DTMF sending time of the DTMF signal. The value (unit: msec) is

directly set in the value field.

For instance, if the sending time needs to be set to 80 msec, the setting

value is "50" (HEX).