Manualshelf

User Manual

ManualsBrandsUTStarcom Korea Technologies ManualsElectronicsWireless Local Loop Fixed Terminal
12345678910
RPC/RP Manual RP Installation
19June2000 WLL-RPC/RP-IN/UM-1.0
3-
19
5. Mount main unit on the mounting plate. Position both the hinge pins in the u-
notches on the mounting plate. Refer to Figure 3-17. Do not fasten with the
screws right now. The antenna cables must be connected first.
Figure 3-17: Mount Main Unit
6. Connect each antenna cable and push the antenna connectors and surplus
antenna cable in between the mounting plate and the RP main unit. Make sure
that the antenna connectors are above the holding bend of the mounting plate
and that the antenna cables are not caught by it.