User Manual

RP Installation RPC/RP Manual

WLL-RPC/RP-IN/UM-1.0 19June2000

Figure 3-14: Outdoor RP Recommended Positions

F WARNING: Installation of the RP in any other position may permit moisture to

enter the device possibly causing damage or injury.

3. Pre-drill holes for bolts according to the dimensions shown in Figure 3-15.

Attach the mounting plate to a wall with 4 bolts. Notice that the lower right

edge of the mounting plate has a bend in it. The purpose of this bend is to

hold the antenna connectors in place. Refer to Figure 3-15.