User Manual

RPC/RP Manual RPC/RP Configuration

19June2000 WLL-RPC/RP-IN/UM-1.0

1. From the Configuration pull-down menu, select Service Data, then Data

Download, and then Data Switch. The Service Data Switch window

appears, as shown in the figure below.

Figure 4-47: Service Data Switch Window

2. Select the target RPC. Make a selection in the Operation Switch Timing

block. If you click the Specified switch date radio button, specify the date

and time for the switch operation to be executed. Click OK to accept the

setting. After switching at the specified time, RPC runs based on the SBY

SDM and each SDM status is switched.

4.3.5 Read Data

Use this function to read the operation data from the current RPC to Netman 2000

while the RPC is operating.

1. From the Configuration main menu, select Service Data, and then Read

Data. This opens the Read System Service Data window, as displayed in the

figure below.

Figure 4-48: Read System Service Data Window