User Manual

RPC/RP Manual RPC/RP Configuration
19June2000 WLL-RPC/RP-IN/UM-1.0
4-
39
the target RPC and putting it into operation by switching to the new program data
at the specified time.
F NOTE: It is recommended that program download be done using RMT via
WLL/V5WLL.
During the operation the system prompts you to disconnect the target RPC. Click
OK to disconnect it. After the operation reconnect the RPC.
1. Click the Maintenance main menu, select the Program Download option,
and then the Program Load option. This opens the File for Program
Download window, as shown in the figure below.
Figure 4-41: File for Program Download Window
F NOTE: The program file must be in the Netman directory. The proper path
should be: C:\program files\UTStarcom\Netman\data. This rule applies to other
data files and data operation.
2. Select the program data file to be downloaded. The program data file must be
of the .prg or .PRG type. When the Open button is clicked, a confirmation
dialog box opens, as displayed below.