User Manual

RPC/RP Manual RPC/RP Configuration
19June2000 WLL-RPC/RP-IN/UM-1.0
4-
37
4.2.8 RPC Connection
To change the number of RPCs to be connected, select RPC Connection from the
Configuration main menu, the Connect RPCs window displays as shown in
Figure 4-39. Click the check button of the target RPCs to be connected and click
OK to connect to the selected RPCs.
Figure 4-39: Connect RPCs Window
4.2.9 Version Window
1. From the Configuration pull-down menu, click the Version option. This
opens the Version window, as illustrated in the figure below.
Figure 4-40: Version Window