User Manual

RPC/RP Manual RPC/RP Configuration

19June2000 WLL-RPC/RP-IN/UM-1.0

buttons in the fields. Click OK to accept the setting or Cancel to stop the

transaction.

4.2.2 RPC Change

Sometimes the operation data for an RPC may not be compatible to the hosting

RPC. Use this function to make changes to the SDM (System Data Memory) so

that it can accommodate the hosting RPC. Before making any change, the RPC

device manager will disconnect from the RPC.

1. From the Configuration main menu, select RPC Change. This opens the

RPC Assignment window, as illustrated in the figure below.

Figure 4-15: RPC Assignment Window

2. Select the target RPC and click OK. This will change the SDM to fit the

target RPC.

3. If this command doesn’t work, exit the current Netman session and restart.

4.2.3 Unit Control

The Unit Control option can be accessed through the Maintenance pull-down

menu. It has the following functions:

• Blockade: block or unblock RPIF, E1IF, RPCs, RPs

• TimeSlot Layout: configure the RP control channel time slot

• Maintenance: set or cancel system maintenance

• Master RP: change Master RP

• RPC Sync: RPC Synchronization

• Online Trace: retrieve the information of the active RP