User Manual

RPC/RP Manual RPC/RP Configuration
19June2000 WLL-RPC/RP-IN/UM-1.0
4-
27
Field Name Description
Node Address The IP address of the node to which the RP is associated
RP Number The ID number of the RP
RPC Number The ID number of the RPC which controls the RP
RP Location The physical location of the RP
RP Street The street name of the location
Province/State The province/state name of the location. Select from the drop-down list.
RP Address (City) The city name of the location. Select from the drop-down list.
Zip/Postal Code Zip/Postal Code of the location
Latitude (degree) Latitude degree of the RP location.
Longitude (degree) Longitude degree of the RP location
RP information Information about the RP operation status
Master RP ID The ID number of the Master RP
Power Type There are two power supply patterns:
Local - the power is supplied from the RP power unit.
Remo - the power is supplied from the RPC.
Select from the drop-down list.
# of Antennas The number of the antennas the RP has. The indoor or outdoor 10mW RP
has 2 antennas, and the outdoor 200mW RP has 4 antennas. Select from
the drop-down list.
Survey ID The ID number of the survey
Bureau ID The ID number of the bureau
Memo Short note
Mode Master RP or slave RP. Select from the drop-down list.
Power Rating Power: 10mW or 200mW. Select from the drop-down list.
Fixture Type The way the RP is mounted. Select from the drop-down list.
Serial Number The serial number of the RP
RP Type Indoor or outdoor type. Select from the drop-down list.
Installed If the RP is installed, check the box.
RP-RPC Line Information Information about the communication cable connecting the RP and the
controlling RPC
Impedance The resistance of the communication cable
Box The specification of the switch box. For instance, a 200mW RP can have
the following specification:
Power Voltage – 220V AC
Dimension – 217mm x 258.5mm x 98mm
Weight – about 4.1 kg
MDF In Main Distribution Frame. The wiring arrangement which connects the
cable coming in from outside
MDF Out Main Distribution Frame. The wiring arrangement which connects the
cable going out from inside
Trunk The communication line between the RP and the RPC
RP Antenna Parameters The specification of the RP antennas
Latitude Latitude of the antenna location (string) (WGS94)
Longitude Longitude of the antenna location
Height Height of the antenna
RF Cable Length Radio Frequency cable length
Elevation Height above the ground
Azimuth The horizontal angle which the radiating lobe of an antenna makes in
angular degrees, in a clockwise direction, from a north-south line in the
northern hemisphere. In the southern hemisphere, the reference is the
south-north line.
Down Tilt The extent with which the antenna mechanically slopes downward
Type Name Name of the antenna type, for instance, OMNI antenna (Co-Liner antenna)
Select Image Selet an image file in .bmp format which presents the mounted RP.
View Image Use the Image Viewer to view the selected image file.
Table 4-4: RP Status Window Field Description