User Manual

RPC/RP Manual RPC/RP Configuration

19June2000 WLL-RPC/RP-IN/UM-1.0

time will be displayed in the box above the button, indicating the time when

the data are updated.

3. With this window you can verify RP installation status, monitor alarms, power

supply status, and transmission information, and identify areas of trouble.

4. If you want to view the status for an individual RP, you may access such a

window by clicking the “+” sign to the left of RPs on the Unit View window.

This displays all the RPs under the RPC. Click the target RP and the Status

View window opens for that RP, as illustrated in Figure 4-28. With this

window you may view or enter the following information about that RP:

• Node Address

• RP Number

• RPC Number

• RP Location

• RP Information

• RP-RPC Line Information

• RP Antenna Parameters

F NOTE: This is an optional information window. The information is stored on

Netman 2000 and will be used in network management, network optimization, and

value-added services, such as location services. The information entered does not

affect the operation of the RP.