User's Manual

DISPLA
DISPLA
Y
Y
VOICE
VOICE
2928
ANS. MACHINE
Blinking call LED when the phone in the service area.
LAMP SETTING
Press [ ].
Press [ ] to save it.
Press [ ], then [ ].
Select the parameter by using the navigation key.
1
1
2
2
3
3
• Incoming call
• Incoming SMS
• Service Light
• Alarm
The user can also overhear the recording and can
choose to accept or reject the call.
1. Setting
1. Setting
Press [ ], [ ].
1
1
Press [ ], then [ ].
Select the parameter by using the navigation
key.
In Greet Voice menu
Select voice comment to be used when answering machine is
activated.
Listen the prompts by pressing [ ] except for user prompt.
In Greet Record menu
Record user comment to use as answering machine greeting.
Press [ ],[ ] then [ ].
Record the user prompt by pressing [ ].
2
2
• Set Bell Time : (Off, Immediately, 5sec, 10sec)
• Set Greet Voice : (Common, User, Driving, Meeting)
• Set Greet Rec
Press [ ] to save it.
3
3
NOTE
Can be reduced the standby time, when service light is on.
1. Incomming call lamp is checked by alert type setting, when alert type is
changed to lamp only.
2. Incomming call lamp can’t change setting value, when alert type is lamp
only mode.
3. Incomming SMS Lamp is checked by alert type setting, when alert type is
changed to lamp only.
4. Incomming SMS lamp can’t change setting value, when alert type is lamp
only mode.
c3000_ 2 2004.9.14 7:5 PM 페이지28