User Manual

Installation Instructions Fixed Subscriber Unit Installation Manual
09/06/2001 Release 2.0
Airstar-Wireless Local Loop
4-24
9. Connect the coaxial cable to the antenna as shown in Figure
4-10.
Coaxial Cable
Figure 4-10 : Coaxial Cable Connection to Antenna
10. Wrap the cable connection first with the self-adhesive
rubber tape. Stretch the tape until it is ½ its original width.
Then wrap the PVC tape around the rubber tape.
4.5 Main Unit Installation
Follow the steps below to install the FSU Main Unit in the subscriber’s
residence.
1. Unpack the FSU and accessories. Make sure all parts are in
good condition. The accessories include :
• AC Cord
• AC/DC Adapter
• Backup Battery Unit
Figure 4-11 shows the FSU and its accessories.