User Manual

Fixed Subscriber Unit Installation Manual Installation Instructions
Release 1.00 10/03/97
Airstar-Wireless Local Loop
4-21
2. Assemble the FSU antenna by attaching the bracket to the
antenna according to Figure 4-7.
Figure 4-7 : Antenna Bracket Assembly
3. After installing the antenna, use the PHS Signal Analyzer to
check the receiving signal level. Measure the reception
level (RX LVL) at the TNC connector on the FSU. Target
values are as follows :
• RX LVL: more than -78dBm (35dBµV)
• Frame Error Rate: less than 2%