User Manual

93
5. Using the phone book
92
5. Using the phone book
To create a phonebook that others cannot see, it is first necessary to set secret mode
on.You can then store names and numbers in the secret phonebook.
•The number of entries for the normal phonebook and the secret phonebook
cannot exceed 500 in combination.
• It is only possible to use the secret phonebook to call when secret mode is on.
Setting secret mode
1
Press es2s2
or esus[
• The current setting is displayed.
2
Press o, and then input your
lock code.
• Press u to switch secret mode off.
3
If the lock code that you input is
correct, secret mode is set to on.
• If the lock code that you input is incorrect...
“Invalid Lock Code” is displayed, and you are returned to
step 1.
• If you turned secret mode off,“Secret Mode Cancelled”
is displayed, the telephone returns to standby mode.
STORING A SECRET PHONE BOOK (continued to next page)
➔
➔
(the asterisks appear
from the right)
[ ] mark is
displayed on
the screen.
• To cancel secret mode
In addition to canceling secret mode by switching it off, you can also switch it
off by switching the telephone off and on, by using Reset or All Reset, or by
erasing the entire phonebook or address book.
You can use the letters assigned to the number buttons (
0
to
9
) for search-
ing, and calling. This quick search function is not available when a call is in progress.
1
Press and hold one of 0to 9
(the button corresponding to the first letter of the name
that you want to search for)}
Example: If you press and hold down the 7 button...
Data starting with p, q, r, s, P, Q, R, S, 7, is dis-
played.
2
Use[to search.
QUICK SEARCH
(when there are three or
fewer matching entries)
(when there are four or more matching
entries)
• When four or more matching entries have been found, it is possible to scroll
through them quickly.
• Press and hold
[
to use quick scrolling.
Quick scrolling is selected automatically after two seconds. To select it immedi-
ately, press
e
.
3
q…Dials the number found.
r…Edit the data
<REF> Editing and adding data P87
t…Delete the data <REF> Deleting data P88
NOTE
• If there is no data in the phonebook whose first character
matches the button that you pressed in step 1, the message
shown on the right is displayed, and you are returned to
standby mode.
NOTE
*SM-801 PHS/sec5(GB) 00.3.9 5:34 PM Page 92