User Manual

3
Enter the time and press e (i).
• If an alarm has already been set, that setting is displayed.
• Use
y to return to the previous display.
4
Press
o
to turn the Snooze function “On”, or
u
to turn
the Snooze function “Off”.
75
4. Convenience features
• When the snooze function is 'On'
When the snooze function is turned 'On', after you stop the
alarm, it rings five times every five minutes.
• When the snooze function is 'Off'
The alarm rings at the set time, but the snooze function does
not operate.
• Before you finish the setting you can use
y to return to
the previous display.
• Press any button to stop the alarm from ringing.
• When you set an alarm adjusted, the alarm is automatically switched on.
Using the alarm clock
1
Press es4s4
or esus[
2
Presso(to turn the alarm clock “On”)
Pressu(to turn the alarm clock “Off”)
• If you attempt to switch the alarm clock on when it has not
been set, the display on the right is shown, and you are
returned to step 1.
NOTE
• When an alarm is set…
The mark is displayed.
• If the alarm setting time arrives while a call is in progress…
The alarm rings when the call is finished.
• The alarm volume is as adjusted in the ringer volume (P55).
If the volume is set to 'Off', the alarm does not sound. It is possi-
ble to set the ringer volume to 'OFF' and receive alarm notifica-
tion by setting the vibrator to 'On' (P53). If the telephone is in the
charger unit in the case of the above setting, the alarm will
sound at the "Middle" volume setting.
• Press any key to stop the alarm ringing.
74
4. Convenience features
You can use the alarm clock to set a date and time for an alarm, and then switch the
alarm setting to 'On' to have the telephone ring for 30 seconds when the set date and
times arrive. The alarm clock is set to 'Off' at the factory.
Reminder: The date and time (P35) must be set in order to use the alarm clock
function.
Setting the alarm clock
1
Press es4s3
or esus[
2
Press eand use
p
to choose the repeat set-
ting that you want for the alarm.
• The following repeat settings are available, and can be
accessed by the above procedure (the default setting is
“Once”).
ALARM CLOCK FEATURES
➔
sun
once
all
mon tue
wed
thu fri sat mon - fri
mon - sat
*SM-801 PHS/sec4(GB) 00.3.9 5:04 PM Page 74