User Manual

Compose up to ten of your own ringer melodies.
• A melody can contain up to 255 notes with eight different tempos.
• After composing a melody, you must select as the ringer type (see p. 56) to
use it for the ringer.
Compose a ringer melody
1
Press es1s3
or esus[
2
esIf no ringer melodies have been composed s step 3
sIf in the middle of composing a melody
(for example, if the phone rang while composing
a melody, or if composition was interrupted in step 4
by pressing w)
1: “Continue” (read melody) s step 4
0: “Erase” (delete the melody being composed)s step 3
3
Press
[
sSelect the number of the melody (press rto
play the selected melody)s
e
57
3. Basic operations
Select the type of ringer used to signal incoming calls from among six different pat-
terns, six melodies, and up to ten melodies that you can compose. The selected
ringer type is used in public and home modes. Pattern 1 is the default ringer type.
1
Press es1s2
or esus[
• The current setting is displayed.
2
Press es]to select the ringer type.
• p has no effect if no custom
melodies have been composed.
• The selected ringer pattern or
melody is played twice.
Press ] while a melody is play-
ing to hear another ringer type.
• When the ringer volume is set to
sliding volume ↑, the ringer will
sound once each at low, medium,
and high volume.
• When the ringer volume is set to
sliding volume ↓, the ringer will
sound once each at high, medium,
and low volume.
3
Press eor wto save the setting.
• The setting will be saved even if the key is pressed after the
ringer stops.
NOTES
• Types of patterns
Patterns 1 to 6
• Types of prerecorded melodies
Radetzky March
Farandole
Dance of the Four Swans
Ode To JOY
Bolero
Saints Go Marching In The
56
3. Basic operations
SELECTING THE RINGER TYPE COMPOSING A RINGER MELODY (continued to next page)
Pattern or melody Your own composition
*SM-801 PHS/sec3(GB) 00.3.9 4:53 PM Page 56