User Manual

88
Setting modem communication (F95)
1
Press .
2
Set to "ON" by using or .
When canceling, set to "OFF".
3
Press .
Modem communication is now possible.
MEMO
When not performing modem communication, always set modem communication
to "OFF".
When you purchase this phone, modem communication is set to "OFF".
Performing modem communication
1
Ensure that the modem and PC etc. are connected,
remove the phone's earphone/microphone terminal
cap and connect the communication cable.
2
Dial the phone number of the communication partner for this data
communication.
3
Press .
4
After the communication partner responds, the PC etc. carries out
the data transfer.
5
When you want to terminate the communication, press .
MEMO
You may not be able to communicate correctly if the signal is weak or the signal
status is bad. Use modem in places where the signal condition is good.
When using, keep the phone and the modem 30cm or more away from the house
telephone.
You cannot place the call from the modem.
USING MODEM FOR DATA/FAX COMMUNICATION (cont.)