User Manual

79
MEMO
If vibration 1 or manner mode is set, the display only will appear and the alarm will not ring.
If the volume setting for incoming calls is set to OFF in "Ring-Tone" of "Selecting the incoming call
notification method (F11)", the display only will appear and the alarm will not ring.
If the schedule time arrives while taking a call or while the phone is switched off, notification will be displayed after the time that was
set when the appointment was registered. (Sometimes appointments that have weekday specification are not displayed.) Display
may also be delayed when multiple schedules and alarms are registered for the same time or for times just before or after.
Confirming or revising the registered content of a schedule
You can confirm the content of a registered schedule and you can immediately revise it if necessary.
You can revise in the order of date, time, appointment, alarm-tone, and phone book association.
1
Press .
2
Press .
3
Select the date on which the schedule you want to
revise is registered and press
.
4
Point to "Edit or Check" by using or .
5
Press .
The selected schedule appears. If the appointment details continues
off the screen, display the details by using
or to scroll.
If there are multiple schedules on the same day or if you are searching
for a schedule before or after that day, use
or to select.
If you only want to confirm the registration and do not want to
revise the content, go to Step 11.
6
Press .
The western calendar will blink.
7
Press or to make the year, month or day that
you want to change blink and revise the date.
Press or to increase or decrease the numeric value. If there is no need
for revision, go to Step 11.
SUN 2/20
New Item
Edit or Check
Schedule
Set
Select