User Manual

68
ADJUSTING THE SOUND
(cont.)
5
Switch between options by pressing or .
As you switch between options, the phone rings the ring-tone or melody. If you
selected "Vibration" in Step 3, the phone vibrates as you switch between options.
Beep 1 ~ 10 : Ring-tone
Melody 1 ~ 11 : Melody numbers are shown in the table on page 70.
Vibration only : Phone vibrates only
Vibration - beep : After 20 seconds of vibration, the phone makes a "beep
beep beep" sound once.
Vibration - ring-tone
: After 10 seconds of vibration, the set ring-tone rings.
6
Press .
The display changes to the screen to set the ring-tone setting. If you selected
"Vibration only" or "Vibration - beep" then the setting is complete and the display
changes to the standby screen.
7
Set the ring-tone volume by using or .
If you selected "Vibration - ring-tone", you cannot select "Step-up" or "Step-down".
8
Press .
The phone beeps to confirm the operation.