User Manual
67
Selecting the ring-tone volume and type
To adjust the ring-tone volume and type, press and hold or
for more than 1 second while in standby condition.
While call volume is set to "Loud" you cannot scroll by pressing
.
Also, when volume is set to "Step-down", you cannot scroll by pressing
.
MEMO
• Only one vibration selection set by "Selecting the incoming call notification method
F11" is displayed. The vibration selections are as follows.
"Vibration 1": Vibration only
"Vibration 2": Vibration - short sound
"Vibration 3": Vibration - ring-tone sound
• When in transceiver mode, you can only use "Vibration 1".
• You cannot use "Step-up" or "Step-down" while in transceiver mode.
Selecting the incoming call notification method (F11)
For each mode, you can select the incoming call notification method from 10
types of ring-tone, 11 melodies or 3 types of vibration notification. The volume and
type are selected from 6 options (including OFF).
■
Selecting the ring-tone or vibration
1
Press .
2
Select which mode to set by using ~ .
You cannot set modes that are not assigned to a number.
3
Press or to select "Tone" or "Vibration".
4
Press .
The screen to select the ring-tone or vibration appears.
● ADJUSTING THE SOUND
Step-down step up vibration (1 ~ 3) OFF Soft Med Loud
Ring-Tone
Med
Soft
OFF
Loud
Select
/
Set
Ring-Tone
Vibration 1
Step-up
Step-down
OFF
Select
/
Set
Only one vibration selection is displayed (see MEMO).
Set Ring-tone
F11
Public
Transceiver
Set Ring-tone
Tone
Vibration
Select
Set