User Manual

44
USING PHONE BOOK
(cont.)
Registering a phone book entry
1
Press .
2
Press .
The number of registered entries is displayed and after that, phone book registration
mode is activated and the screen displays the select input item screen.
3
Select the item you want to input using or and
press
.
Enter the content of any of the following items. You can register an entry from
any of these items. Only input the items you require and leave others blank.
The input selected item screen appears. Input by following the registration method
of each item. After the input of each item is complete, repeat this step 3.
The following shows the items that can be registered and how to register them.
• Name?: Name & group (page 45)
• TEL1?, TEL2?: TEL No. & mark (page 46)
?: Specific incoming ring-tone (page 47)
After you have input all the items you require, go to step 4.
Note that if you have not input TEL1 item, you cannot perform
the step 4 operation.
4
Select "Registry End" using the or .
5
Press .
A memory No. input prompt appears.
6
Enter the memory number (000 ~ 299).
If you wish to register to the smallest vacant memory number,
do not enter a number and go to step 7.
If you do not enter a number and press
, the entry will be
registered in the smallest vacant memory number after No.010.
If you store numbers that you call frequently in No. 000 ~ 009,
you can call them using two touch dialing (page 52) or three
touch dialing (page 53).
Name & group?
Name?
TEL 1?
TEL 2?
?
Edit
Select
Phone book
NameSearch
Register PhnBk
Group
Search
Mark
Search
MmryNo.
Search
Memory No.?
No.122
Memory No.?
No.D9 _ _