User Manual

106
Memo
• A call may be interrupted without other
party terminating the call.
– Excessive distance
– Low battery charge
– When signals are interrupted or
obstructed by any reason, a
disconnect tone is sounded in this
case.
Receiving a call
Operation
The incoming tone or vibration
activates and the incoming light blinks
d
Pull out the antenna
d
Press
lights up and the calling time will
be displayed.
d
Communicate to the other party
d
Press to terminate your call
Memo
• The communication will be cancelled
automatically if you do not press
within about 30 seconds.
• When you cannot answer the phone
straight away, you can stop the ring
tone by pressing
. Also when the
phone is vibrating because of an
incoming call, you can stop it in the
same way.
• When any key answer set to "NO",
you can press any key except
to
answer the call.
● USING PHONE AS A TRANSCEIVER (cont.)