User Manual

702 U User Manual Other Essential Functions 4-33
6. Use the navigation key or to reach (Enable or Disable) and
press the left soft key (Ok) to select.
7. Use the navigation key
or to reach Code Request and press the
left soft key (Ok) to select.
8. Code Request is password protected. When “Enter Code:” is displayed
on the LCD screen enter the six-digit password and press the left soft
key (Ok). If the correct password has been entered, the LCD
screen of the phone will display ON and OFF.
 The default password is 8-8-8-8-8-8
9. Use the navigation key
or to reach (ON or OFF) and press the
left soft key
(Ok) to select.
10. Use the navigation key
or to reach Change Code and press the
left soft key (Ok) to select.
11. Enter the current 6-digit password (default password is 8-8-8-8-8-8) and
press the left soft key (Ok) to enter.
12. Enter a new 6-digit password (0~9 only) in the “Enter New Code”
field. Use the navigation key
to reach “Confirm Code” field.
13. Re-enter the new password and press the left soft key (Ok) to
complete the change.
14. To exit and return to standby mode press
(End).
4.3.8.3 Reset Phone to Default Setting
Menux
xx
xSettingx
xx
xSet Securityx
xx
xReset Al x
xx
xDone
1. Press the left soft key (Menu) to access the menu options.