User Manual

702 U User Manual Other Essential Functions 4-5
16. Use the navigation key or to select an alarm tone (Ring 1, Ring
2, etc.) and press the left soft key (Ok) to select. When
changing the ringing tone types, the phone automatically rings.
17. Use the navigation key
or to reach Keypad Tone and press the
left soft key (Ok) to select.
18. Use the navigation key
or to turn the keypad tone (ON or
OFF) and press the left soft key
(Ok) to select.
19. Use the navigation key or to reach Alert Tone and press the
left soft key (Ok) to select.
20. Use the navigation key
or to turn the alert tone (ON or OFF)
and press the left soft key (Ok) to select.
21. To exit and return to standby mode press
(End).
4.2 SMS
The Short Message Service (SMS) is a network service, which enables you
to send and receive text messages up to 116 English or 58 Chinese
characters in length. Messages can be edited, stored, deleted and forward to
others using your phone.
Before you can send any messages, you will need to contact your service
provider to subscribe to the SMS. Your service provider can tell you if the
service is available in your area and answer any questions.
Prior to sending any text messages make sure the receiving phone is SMS
compatible.
4.2.1 How to Enter Letters, Characters and Symbols Using the Keypad
As shown in the table below, more than one character (letters and a number)
is assigned to each key of the keypad. The available character set depends
on the input character mode and whether a phone number, name or text
message is being entered into the handset. Only the characters (0-9, *, #
and
pause for IP only) are available for a phone number whereas the letters
(A, a, B, b, C, etc), numbers and symbols can be used for a name or text
message.