User Manual

702 U User Manual Basic Operations 2-7
5. Press the left soft key (Options.)
 If the calling information is “No Caller ID” for the missed call, “Error”
is displayed on the LCD Screen and the Store option is not available.
6. Use the navigation key
or to reach Store and press the left soft
key (Ok) to select.
7. Enter the person’s name (up to 12 letters) or leave blank if desired. Press
the left soft key (Ok) to enter. If no name is entered, the phone
number is use for the name.
 If the LCD display flashes “Exists” after you enter a name it
means there is already an entry with the exact same name and
phone number stored in the phone’s memory.
 If there are no empty memory locations, the LCD displays
flashes ”Full”. Select a name and phone number to delete before
adding new name and phone number.
8. Choose a Group by pressing or and then press the left soft
key (Ok).
9. The phone enters the information and returns to the Options menu.
Press the right soft key
(Back) to return to the list of missed
calls.
10. Press
(End) to exit the menu and return to stand-by mode.
2.4.2 Outgoing Call log
The last forty phone numbers (maximum of 24 digits each) dialed on the
phone are stored in memory. The outgoing call log allows you to view the
phone number, call the phone number, view the time of the call, call
duration, delete the phone number or save it to the Address book.
If the calling information (phone number, name, etc.) has been entered into
the Address book, the name and group is shown when the call is displayed.


 Note:
 The Outgoing log can store a maximum of 40 phone numbers. When the
41
st
phone number is dialed the oldest phone number is deleted.