User Manual

1-8 Before Using Your Phone 702-U User Manual
1.5.2 Battery Replacement
The battery can be charged and discharged hundreds of times but will
eventually wear out. When the operating time (talk time and stand-by time)
becomes obviously shorter than normal, it is time to replace the battery.
1. Turn off the phone by pressing and holding
until the LCD is
cleared of all texts and icons.
2. Remove the cover by sliding while pressing towards the base of the
phone as illustrated.
3. Remove the battery. Disconnect the cord by firmly griping the connector
and pulling gently as illustrated.
4. Connect the cord of the new
battery by firmly inserting the
connector until a click is heard. Check the orientation of the connector
before inserting.
(
((
( Note: The battery cord is color-coded, the red line is positive (anode), the black
line is negative (cathode) and the yellow line is a sensor output
5. Insert the battery into the compartment of the phone. Place the cord
between the phone body and the battery.
(
((
( Note: When installing the battery, make sure the connector of the battery cord is
firmly inserted into the connector pin of the phone. Do not use excessive
force when handling the battery cord.
6. Attach the battery cover. Fit the cover into the slots and slide in the
direction of arrow until a click is heard. Do not pinch the battery cord
with the cover.