User Manual

Pressing the

key increases

the volume. If the volume set-

ting is High, then pressing the

key will have no effect.

Press the key.

The ring pattern stops and the phone returns

to the display before the

key was pressed.

Even if you do not press the

key, the ring

pattern will stop one ring pattern has finished.

• You can adjust the volume for the ring pat-

tern when you receive a call by pressing

the

or key while the phone is

playing the ring pattern.

Changing the ring pattern

You can check and adjust the settings for the ring pattern that is used to

inform you of incoming calls. The default setting is 01. You can adjust the

setting while waiting for a call.

Press and hold down the key.

When “F_” appears in the information area of

the display release the key.

Press the key.

The current ring pattern setting is displayed.

Press the or key to change the

ring pattern.

You can set the ring pattern to one of four

tones, or 20 melodies.

Pressing the

or key causes the

phone to play the selected ring pattern.

Pressing the

or key again causes

the phone to switch to the next ring pattern.

01 02 03 04 ~ 21 22 23 24

Using Advanced Functions

Ring pattern

UTS700X_Body.pm6 1/6/00, 2:50 PM18