User Manual

7
Getting Started
Basic
Operations
Advanced
Dialing Services
Using Advanced
Functions
Appendix
Basic Operations
closing the flip cover.
Five seconds after the flip cover is closed,
the phone will emit a click and the call is dis-
connected.
For the five seconds after the flip cover is closed,
the connection to the other party is connect but
the sound is muted. If you close the flip cover
by mistake, you can continue the call if you open
the flip cover within the five seconds, provided
the other party has not hung up.
Inserting a pause into the telephone number
You can insert a pause into the telephone number you want to dial.
1 Enter the telephone number.
2 Press the key at the point you want
to enter the pause. A “–” is inserted into
the number shown on the display.
Pressing the
key a second time
causes “P” to be displayed.
• If you press the key once, a hyphen
“–” is inserted into the number.
3 Enter any other numbers that are need-
ed after the pause.
4 Press the key.
The numbers up to the point you inserted the
pause are dialed.
When the other party answers, press the
key again.
The numbers entered after the pause are dialed.
Notes:
• You cannot insert a pause as the first digit of a number.
• You cannot insert two, or more, pauses in succession into the
number.
• You cannot call telephone numbers that have a sub-address from
this phone.
• If the reception signal become weak during a call, a warning tone
will be emitted.
Basic
Operations
Basic
Operations
Hyphen
Pause
UTS700X_Body.pm6 1/6/00, 2:49 PM7